Mike-L Posted February 16, 2016 Share Posted February 16, 2016 Y'all seen this?* This is from the Raiden facebook page. Looks like an Innofader collaboration is in the works! (*Dirk taught me how to speak like this.) 3 Quote Link to comment Share on other sites More sharing options...
djdiggla Posted February 16, 2016 Share Posted February 16, 2016 Woah. (*Dirk taught me how to speak like this.)I blame yall for rubbing off on me too! Got people looking at me crazy when I say stuff like "gutted" 2 Quote Link to comment Share on other sites More sharing options...
Mike-L Posted February 16, 2016 Author Share Posted February 16, 2016 I blame yall for rubbing off on me too! Got people looking at me crazy when I say stuff like "gutted" Haha! Quote Link to comment Share on other sites More sharing options...
Acts_One Posted February 17, 2016 Share Posted February 17, 2016 yeah this is nasty. I'm assuming it'll be the mini. I guess one of the biggest caveat is getting power to it..... which would mean another damn wire. Maybe it'll utilize the USB from the turntable to power it? Quote Link to comment Share on other sites More sharing options...
Vekked Posted February 18, 2016 Share Posted February 18, 2016 yea it's a mini innofader for sure. Which IMO is pretty ideal because I mean we're going for portability after all. If we were chasing the best quality scratch setup without size considerations, we would just end up making normal turntables and a mixer with a car battery attached. 1 Quote Link to comment Share on other sites More sharing options...
Guest petesasqwax Posted February 18, 2016 Share Posted February 18, 2016 Depends on the price point, though. If they put it up too high I feel like the AMX is going to be a much better option - power it through one of those USB batteries and it's a use-anywhere (fully featured) mixer, it has mini-Inno in there already plus stick it in a crib and it's a fully fledged second mixer. Add a laptop and you're good to go with Serato. I'm honestly stunned people aren't losing their shit over the AMXs 1 Quote Link to comment Share on other sites More sharing options...
Mutis Mayfield Posted February 18, 2016 Share Posted February 18, 2016 Depends on the price point, though. If they put it up too high I feel like the AMX is going to be a much better option - power it through one of those USB batteries and it's a use-anywhere (fully featured) mixer, it has mini-Inno in there already plus stick it in a crib and it's a fully fledged second mixer. Add a laptop and you're good to go with Serato. I'm honestly stunned people aren't losing their shit over the AMXs Blame DVS extra pack and NI to avoid inputs in Z1 (and don't expect an mk2 with them. I bet for bluetooth lte instead of) AMX are the best choice for those who start today and want DVS but it seems that newbies doesn't want DVS or those who want grew with brother gear making them unnecessary... Quote Link to comment Share on other sites More sharing options...
Vekked Posted February 18, 2016 Share Posted February 18, 2016 Depends on the price point, though. If they put it up too high I feel like the AMX is going to be a much better option - power it through one of those USB batteries and it's a use-anywhere (fully featured) mixer, it has mini-Inno in there already plus stick it in a crib and it's a fully fledged second mixer. Add a laptop and you're good to go with Serato. I'm honestly stunned people aren't losing their shit over the AMXs I've heard the AMXs are very unstable for DVS use. Do they actually work with USB power/no laptop? That's pretty cool, I assumed it was all midi and wasn't actually cutting the analog signal. Quote Link to comment Share on other sites More sharing options...
Guest petesasqwax Posted February 18, 2016 Share Posted February 18, 2016 Bear with me... tests are being done Quote Link to comment Share on other sites More sharing options...
Acts_One Posted February 18, 2016 Share Posted February 18, 2016 yea it's a mini innofader for sure. Which IMO is pretty ideal because I mean we're going for portability after all. If we were chasing the best quality scratch setup without size considerations, we would just end up making normal turntables and a mixer with a car battery attached.Portability??? 1 Quote Link to comment Share on other sites More sharing options...
wax inspektor Posted February 18, 2016 Share Posted February 18, 2016 sth. that's weid about the picture is that the screws are M2 - which are used for smaller ALPS fader (just like in the raiden/frisk)... The Mini-Innofader is hold by M3 screws though... I also can't make out any I/O's on that thing... looks like early stage to me... hope they make it rechargable...Anyone know if the mini takes 9V like the innofader pro (2) ?@vekkedThe AMX unfortunatly only works in consumption with a laptop or IPad.... aaaaand that sucks so bad You can't use it as standalone 2CH mixer for analog sources without having it hooked up to a computer... 1 Quote Link to comment Share on other sites More sharing options...
Guest petesasqwax Posted February 18, 2016 Share Posted February 18, 2016 FUCK - I just found that out, too. Would it be possible to mod it so that it did work standalone? Quote Link to comment Share on other sites More sharing options...
Guest petesasqwax Posted February 18, 2016 Share Posted February 18, 2016 I feel like Akai fucked up so badly with that - they missed out on so much revenue Quote Link to comment Share on other sites More sharing options...
Vekked Posted February 18, 2016 Share Posted February 18, 2016 I feel like Akai fucked up so badly with that - they missed out on so much revenue Yeeeap. I was stoked on it too at one point but I've heard nothing good about it really... Quote Link to comment Share on other sites More sharing options...
Mutis Mayfield Posted February 19, 2016 Share Posted February 19, 2016 Irig dj is the newrest my bad... ;( Quote Link to comment Share on other sites More sharing options...
Mike-L Posted May 25, 2016 Author Share Posted May 25, 2016 More hype coming from Raiden. Looks like the innofader is going to drop soon! <iframe src="https://www.facebook.com/plugins/post.php?href=https%3A%2F%2Fwww.facebook.com%2Fraiden.fader%2Fposts%2F1708971529363266%3A0&width=500"width="500" height="628" style="border:none;overflow:hidden" scrolling="no" frameborder="0" allowTransparency="true"></iframe> Quote Link to comment Share on other sites More sharing options...
Motek Posted May 27, 2016 Share Posted May 27, 2016 Oh shit that looks Hella dope. This will need power right? Wonder what they are going to do... Quote Link to comment Share on other sites More sharing options...
Motek Posted June 1, 2016 Share Posted June 1, 2016 Another teaser on their Facebook page. Has to be released soon! Quote Link to comment Share on other sites More sharing options...
FreshPete Posted June 10, 2016 Share Posted June 10, 2016 (edited) They just posted this up on Facebook Edited June 10, 2016 by FreshPete Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.