wax inspektor

it's an average 2" fullrange speaker i snatched of a portable mp3 player. i hot glued it and wired it in series with the OG speaker... Back in 2013 I did what you suggested - had a portable speaker with it's own amp in there but I went back to the OG amp because I had so many electric consumers in there that the pt01 got overloaded... there is so many cool shit you can do without needing any power... line faders, cue-option, ashtray...

@djlogix does your Bluetooth device have ground loop noise? ground loop isolator is the key to eleminate those... those worked fine for me: http://www.ebay.com/itm/3-5mm-Aux-Audio-Noise-Filter-Ground-Loop-Isolator-Eliminate-Car-Electrical-Noise-/151617844291?hash=item234d20b443:g:1FYAAOSwo4pYOStu been using them in the pt01 and several DIY bluetooth speakers... it's based on a coil / galvanic isolation.

...what's your guess? since this is a switch and it appears to not pop i was hoping to replace it with reed switches ...a few pages before i said that the raiden beta had no stable mixing circuit means when you close the fader the aux in gets louder... finally got my hands on the final version and it's true - they didn't change that... wtf?! is everybody deaf? sure.. it's hard to make out with a beat playing but if you feed your aux with a long note,sine wave or pink noise while a turntable is connected you'll notice it real easily. i think they went for a compromise there. if you replace there 1k mixing resistors with 47k the mixing will be stable which leads to a very low output though... could anyone please test their JDD or Triggah to see how they behave ? also which one is the "loudest"?

wiring of the relay is damn i easy - i could help with that. the one i posted is not suitable ootb though - you need a 9V switch relais... 9 + __/ __REL _____PT01 MOTOR OUT + v - _____AIS _____MOTOR + the open format start/stop is NOT a momentary switch - the term arcade button is irritating - been there too...

^ momentary switch and a print relay example: https://www.conrad.de/de/printrelais-5-vdc-10-a-1-wechsler-hongfa-hf3fa005-ztf-1-st-507549.html

the midi feature is so crazy dope man!!

cheers man.. my 06 runs on AC though... there seems to be 2 models?!

the inner diameter of the plug is about 2,5mm and the pin of the power socket definitly is bigger then that... 3,3mm would be the next size? I never came across those I think... The mixer needs the Vestax AC14 power adapter - maybe someone has it?

thanx for responding! I tried those since these are quite popular sizes but the inner pin is too fat... Even the power adapters with different plugs to put on didn't include a suitable one... thought it's some J (apan) plug ...

hey guys, old topic - recent problem... I got the PMC - 06 Pro VCA ( with the -12dB / + 24dB EQ's) but I'm searching my ass off for a suitable power plug... I really just need the plug - not the complete power adapter... Does anyone know the inner and outer dimensions of the plug? Any tipp would be greatly appreciated! Cheers (stock pic)

nops - that's a pretty standard hard plastic enclosure. I'd love to see some metal casings though <3

brilliant!! when will it be available for the masses? I love the "put on top" idea...

^ i was lucky enough to find another pair of PT01s for very little money (50€ for both) when no one was giving a shit about them - this one is 7"only - true - concepted for scratching only... the other pair i have is my park set up - each one paired with a faderbox and a passive mixer in between - good fun! it's pretty simple to add a bluetooth receiver as a line in also - my faderboxes have them and it's suuuper chilled to stream a beat/looper instead of having another wire... @ rasteri do you already can tell how a M44/7 would perform with your nanofader PCB? also.. you going to sell complete kits ( without fader ) or do I have to get the components on my own? I think got everything - not as SMDs though - a complete package would super sweet - a list should do it too if it eases stuff for you

...so how does the focus fader actually work? is there stuff I could read or is it a secret?

sth. that's weid about the picture is that the screws are M2 - which are used for smaller ALPS fader (just like in the raiden/frisk)... The Mini-Innofader is hold by M3 screws though... I also can't make out any I/O's on that thing... looks like early stage to me... hope they make it rechargable... Anyone know if the mini takes 9V like the innofader pro (2) ? @vekked The AMX unfortunatly only works in consumption with a laptop or IPad.... aaaaand that sucks so bad You can't use it as standalone 2CH mixer for analog sources without having it hooked up to a computer...