CompeteWithPete Posted February 7, 2012 Share Posted February 7, 2012 im using an mpc as the midi. So in reason, i select a rack from the drop down and assign to channel 1, no problem. i have control and sound. however suddenly when i select anything to channel 2 and so on, the meter jumps and recognizes its being played, but no sound.... any suggestions? Quote Link to comment Share on other sites More sharing options...
ericuk Posted February 7, 2012 Share Posted February 7, 2012 shit homes... I don't use reason but if it were infront of me, I could prolly figure it out. I dont wanna assume what you know so Ima start with the obvious ish. you've been running all the sound modules through a mixer and then into the master stereo out right? Are you getting sound from the sound modules if you draw random notes into the sequencer at the bottom? Quote Link to comment Share on other sites More sharing options...
x2k Posted February 7, 2012 Share Posted February 7, 2012 Are you talking mid channel or audio channel? If you're talking midi channel you need to change the channel that the mpc is transmitting on. If you're talking audio then do you have a multi output audio interface? If not the you only have 2 channels available. Quote Link to comment Share on other sites More sharing options...
CompeteWithPete Posted February 7, 2012 Author Share Posted February 7, 2012 havent tried that yet. i give it a whirl when i get home. it used to work just fine. i havent used it in a while and now suddenly its acting up. anyway ill post an update later, thx Quote Link to comment Share on other sites More sharing options...
CompeteWithPete Posted February 7, 2012 Author Share Posted February 7, 2012 @x2k mpc is set to the correct channels. i have reason on B. so i select the channel and assign B in the mpc. but i do 2B and up it wont play sound. however 1B works. im stumped Quote Link to comment Share on other sites More sharing options...
kut_class Posted February 7, 2012 Share Posted February 7, 2012 If u draw something in the track does it play ? If not ineed to sort the audio routing issue, if yes its a MIDI issue .. I demand answers n screen shots and your bank acc. Sort code n mothers maiden name ;-) Quote Link to comment Share on other sites More sharing options...
CompeteWithPete Posted February 8, 2012 Author Share Posted February 8, 2012 figured it out. at some point i must have accidentally saved my default workstation without the mixer.... durrrrr. problem solved Quote Link to comment Share on other sites More sharing options...
CompeteWithPete Posted February 8, 2012 Author Share Posted February 8, 2012 I demand answers n screen shots and your bank acc. Sort code n mothers maiden name ;-) they be stealin my bucket Quote Link to comment Share on other sites More sharing options...
ericuk Posted February 8, 2012 Share Posted February 8, 2012 you've been running all the sound modules through a mixer and then into the master stereo out right? Shiiiiiiiiiiiiiiiiiiiiiit I gone done did it again like some kinda columbo muthafucka Quote Link to comment Share on other sites More sharing options...
CompeteWithPete Posted February 8, 2012 Author Share Posted February 8, 2012 indeed you did eric! thx!and u dont even use reason... aint that some shit Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.