Efhutton Posted March 1, 2018 Share Posted March 1, 2018 So far so good. 2 or 3 sessions a day (only charged it once) Everything working as it should, happy with purchase. 2 Quote Link to comment Share on other sites More sharing options...
kebzer Posted March 5, 2018 Share Posted March 5, 2018 Where did you buy one?? Quote Link to comment Share on other sites More sharing options...
arkei Posted March 5, 2018 Share Posted March 5, 2018 Does it have ground connectors? Quote Link to comment Share on other sites More sharing options...
Mutis Mayfield Posted March 5, 2018 Share Posted March 5, 2018 It includes an RME? 2 Quote Link to comment Share on other sites More sharing options...
Efhutton Posted March 5, 2018 Author Share Posted March 5, 2018 Where did you buy one??https://www.recordcase.de/en/dj-tech-handy-kutzDoes it have ground connectors?nope, but at some point i'll open it up and see what options for making one there are. it sounds good, even when running thru the aux in of my car Quote Link to comment Share on other sites More sharing options...
Efhutton Posted March 5, 2018 Author Share Posted March 5, 2018 It includes an RME?do you mean an interface? if so, no it doesn't have one 3 Quote Link to comment Share on other sites More sharing options...
Efhutton Posted March 5, 2018 Author Share Posted March 5, 2018 i do wonder if there's a way to route each channel thru the "tone" control, cause that would be nice.the tone isn't super handy on the master out. Quote Link to comment Share on other sites More sharing options...
kebzer Posted March 6, 2018 Share Posted March 6, 2018 Where did you buy one??https://www.recordcase.de/en/dj-tech-handy-kutz Thanks for the link, but it says release date 30th April, wtf? Quote Link to comment Share on other sites More sharing options...
Guest rasteri Posted March 6, 2018 Share Posted March 6, 2018 Hmm the lack of a ground connector is an odd omission for a device with a phono preamp. If you use it with a technics the entire chassis will be floating and will act like an antenna. You might get away with it in some environments but I wouldn't try using this in a club. Depending on how the device is constructed you might be able to replace one of the chassis screws with a thumbscrew, something like this - Although you might get better results connecting it to one of the phono connectors' grounds, depending on how the grounding scheme in the mixer is designed. 1 Quote Link to comment Share on other sites More sharing options...
jeljms Posted March 6, 2018 Share Posted March 6, 2018 Wonder why they didn't design it the other way round so the width was shorter than the depth (like a PMC 06). It is still only 15cm wide but they would have shaved an extra 4cm off the width if they'd done that. Something like this: https://www.juno.co.uk/products/gemini-mm1-2-channel-compact-dj-mixer/568310-01/?currency=GBP&flt=1&gclid=CjwKCAiAlfnUBRBQEiwAWpPA6Z7N4BHq-UztJRYbYYWhxHQ4JFIY9D2vwMoiOMXt48SV9jG87es9axoCCBAQAvD_BwE Quote Link to comment Share on other sites More sharing options...
Mutis Mayfield Posted March 6, 2018 Share Posted March 6, 2018 It includes an RME? do you mean an interface? if so, no it doesn't have oneI was kidding. Just forum meme which emerges once a week... Wonder why they didn't design it the other way round so the width was shorter than the depth (like a PMC 06). It is still only 15cm wide but they would have shaved an extra 4cm off the width if they'd done that.Something like this: https://www.juno.co.uk/products/gemini-mm1-2-channel-compact-dj-mixer/568310-01/?currency=GBP&flt=1&gclid=CjwKCAiAlfnUBRBQEiwAWpPA6Z7N4BHq-UztJRYbYYWhxHQ4JFIY9D2vwMoiOMXt48SV9jG87es9axoCCBAQAvD_BwEhttps://instagram.com/p/BWaaDKQFVAj 1 Quote Link to comment Share on other sites More sharing options...
Mutis Mayfield Posted March 6, 2018 Share Posted March 6, 2018 Check the 2 pics...https://instagram.com/p/BWaaDKQFVAj Quote Link to comment Share on other sites More sharing options...
Efhutton Posted March 7, 2018 Author Share Posted March 7, 2018 Hmm the lack of a ground connector is an odd omission for a device with a phono preamp. If you use it with a technics the entire chassis will be floating and will act like an antenna. You might get away with it in some environments but I wouldn't try using this in a club. Depending on how the device is constructed you might be able to replace one of the chassis screws with a thumbscrew, something like this - Although you might get better results connecting it to one of the phono connectors' grounds, depending on how the grounding scheme in the mixer is designed.it hums if connected and not powered on, but when i turn the power on the hum stops Quote Link to comment Share on other sites More sharing options...
Efhutton Posted March 7, 2018 Author Share Posted March 7, 2018 Where did you buy one??https://www.recordcase.de/en/dj-tech-handy-kutz Thanks for the link, but it says release date 30th April, wtf? you can try emailing these reps and ask andreas.renner@gsm-multimedia.der.kuehlbaack@gsm-multimedia.de Quote Link to comment Share on other sites More sharing options...
Efhutton Posted March 7, 2018 Author Share Posted March 7, 2018 (edited) It includes an RME?do you mean an interface? if so, no it doesn't have oneI was kidding. Just forum meme which emerges once a week... Wonder why they didn't design it the other way round so the width was shorter than the depth (like a PMC 06). It is still only 15cm wide but they would have shaved an extra 4cm off the width if they'd done that.Something like this: https://www.juno.co.uk/products/gemini-mm1-2-channel-compact-dj-mixer/568310-01/?currency=GBP&flt=1&gclid=CjwKCAiAlfnUBRBQEiwAWpPA6Z7N4BHq-UztJRYbYYWhxHQ4JFIY9D2vwMoiOMXt48SV9jG87es9axoCCBAQAvD_BwEhttps://instagram.com/p/BWaaDKQFVAj i figured is that mixer batt powered?? Edited March 7, 2018 by Efhutton Quote Link to comment Share on other sites More sharing options...
Efhutton Posted March 7, 2018 Author Share Posted March 7, 2018 Wonder why they didn't design it the other way round so the width was shorter than the depth (like a PMC 06). It is still only 15cm wide but they would have shaved an extra 4cm off the width if they'd done that. Something like this: https://www.juno.co.uk/products/gemini-mm1-2-channel-compact-dj-mixer/568310-01/?currency=GBP&flt=1&gclid=CjwKCAiAlfnUBRBQEiwAWpPA6Z7N4BHq-UztJRYbYYWhxHQ4JFIY9D2vwMoiOMXt48SV9jG87es9axoCCBAQAvD_BwE the height of the handykutz is nice, and it weighs enough to not slide around yea, if only Vestax had known, and stayed around to make battery powered 06s 1 Quote Link to comment Share on other sites More sharing options...
ELGEE Posted March 7, 2018 Share Posted March 7, 2018 This should have been a thing http://www.skratchworx.com/newspage.php?fn_mode=comments&fn_id=911 1 Quote Link to comment Share on other sites More sharing options...
djdiggla Posted March 8, 2018 Share Posted March 8, 2018 It includes an RME?FLOLOLOL Everytime I forget about it this joke pops back and cracks me up! 1 Quote Link to comment Share on other sites More sharing options...
Mutis Mayfield Posted March 10, 2018 Share Posted March 10, 2018 It includes an RME? do you mean an interface? if so, no it doesn't have oneI was kidding. Just forum meme which emerges once a week... Wonder why they didn't design it the other way round so the width was shorter than the depth (like a PMC 06). It is still only 15cm wide but they would have shaved an extra 4cm off the width if they'd done that.Something like this: https://www.juno.co.uk/products/gemini-mm1-2-channel-compact-dj-mixer/568310-01/?currency=GBP&flt=1&gclid=CjwKCAiAlfnUBRBQEiwAWpPA6Z7N4BHq-UztJRYbYYWhxHQ4JFIY9D2vwMoiOMXt48SV9jG87es9axoCCBAQAvD_BwE https://instagram.com/p/BWaaDKQFVAji figured is that mixer batt powered??Not at the moment but it could be a great addition. Vestax PSU is rare af and my skills aren’t so good. Anyways it was just a metal working cutting fader space and very little soldering to keep things in place Quote Link to comment Share on other sites More sharing options...
Mutis Mayfield Posted March 10, 2018 Share Posted March 10, 2018 It includes an RME? FLOLOLOL Everytime I forget about it this joke pops back and cracks me up!The question is: who nobody made a meme gif about this yet?https://instagram.com/p/BgIwbqxjbD1 1 Quote Link to comment Share on other sites More sharing options...
Efhutton Posted March 10, 2018 Author Share Posted March 10, 2018 is that mixer batt powered??Not at the moment but it could be a great addition. Vestax PSU is rare af and my skills arent so good. Anyways it was just a metal working cutting fader space and very little soldering to keep things in place This is the battery i havehttps://m.banggood.com/110V220V-42000mA-Portable-Power-Bank-Generic-ACDC-Solar-USB-Socket-Energy-Storage-Power-Supply-p-1201252.html?rmmds=search Quote Link to comment Share on other sites More sharing options...
Mutis Mayfield Posted March 10, 2018 Share Posted March 10, 2018 Interesting...! I never thought about battery pack with regular psu plugs. Did you tried with something power hunger? The 06 ask for 15V 2A if I remember well... Quote Link to comment Share on other sites More sharing options...
Efhutton Posted March 10, 2018 Author Share Posted March 10, 2018 Interesting...! I never thought about battery pack with regular psu plugs. Did you tried with something power hunger? The 06 ask for 15V 2A if I remember well... it'll run the denon hs5500 for about 4 hours Quote Link to comment Share on other sites More sharing options...
Mutis Mayfield Posted March 10, 2018 Share Posted March 10, 2018 Great since the 06 owner will use it in junction with a 3700. Thanks a lot, mate! Quote Link to comment Share on other sites More sharing options...
Efhutton Posted April 6, 2019 Author Share Posted April 6, 2019 (edited) Ok, so i`m an idiotPlugged in a 15 volt power supply. The proper one is 7 volts.The entire mixer still works, but the cf "pops" like a diy passive faderAnyone got ideas what fried. (My grandpa eyes cant see anything) here's the back of the powerboard https://imgur.com/kkOI1Iy Edited April 6, 2019 by Efhutton Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.