Freshcuts Posted February 9, 2017 Share Posted February 9, 2017 Hi there! bought a second hand Kontrol Z2 mixer recently and I noticed that the stock innofader had an issue on the left cut. When scratching sharply I noticed that there was a small decay when the fader was closed. I suspected that the cut-in was wrong and it was bleeding so I opened it up and tried to calibrate it following the instructions here:http://www.innofader.com/installations.php?id=46&pid=16 I think I messed it up while calibrating and now none of the two sides of the fader cut. Is there a way to reset to factory settings? I tried adjusting the lag like 50 times thinking that the small increments of adjustment will take many trials but did not work for me. I also have an innofader 1 that I had bought when you first launched for my Vestax PMC 05 pro 2 which is now in storage. Do you think if I cant fix the Z2 calibration I can install the innofader 1 ? (its not listed here: http://www.innofader.com/mixers.php?id=138 Thanks in advance Quote Link to comment Share on other sites More sharing options...
Darcyd Posted February 10, 2017 Share Posted February 10, 2017 If you go to the Settings Menu, you'll find the Traktor Kontrol Z2 menu. You should be able to recalibrate the CF in this menu. It may or may not help you, but it's worth taking a look. Quote Link to comment Share on other sites More sharing options...
Freshcuts Posted February 10, 2017 Author Share Posted February 10, 2017 Thanks Darcyd! I already did it but unfortunately it didn't help. I think that I completely messed up the calibration or something. I ordered a Innofader PNP but it will take 5 days to arrive. No playing with the new mixer till then :S Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.