Owen83 Posted November 14, 2016 Share Posted November 14, 2016 If u still have nano fader boards? I would like 1, 2 if possible with 1 fader. I have been watching this page for a few weeks now a love what's happening here. Quote Link to comment Share on other sites More sharing options...
JSAbutin Posted November 22, 2016 Share Posted November 22, 2016 Rasteri is there any way to connect the audioin L & R without desoldering the 2 capacitors on the pt01 board? I already fucked up 2 pt01 urghhh Quote Link to comment Share on other sites More sharing options...
Guest rasteri Posted November 23, 2016 Share Posted November 23, 2016 I dunno, you could try cutting the cable that links the EQ/pitch board and splicing into that, but I've never tried it. You can't have fucked it up too badly surely? I've kinda fucked up the pads on mine from repeated soldering but I just run wires to nearby components now. Quote Link to comment Share on other sites More sharing options...
JSAbutin Posted November 23, 2016 Share Posted November 23, 2016 I dunno, you could try cutting the cable that links the EQ/pitch board and splicing into that, but I've never tried it.You can't have fucked it up too badly surely? I've kinda fucked up the pads on mine from repeated soldering but I just run wires to nearby components now.The solder on the board (or whatever you call it lol) itself came off but thats it. Thats a good news then...pt01 not completely done Thanks man! How did you run wires to nearby components? Any pics by any chance? Quote Link to comment Share on other sites More sharing options...
JSAbutin Posted November 23, 2016 Share Posted November 23, 2016 Btw my pt01's are not powering on Quote Link to comment Share on other sites More sharing options...
Guest rasteri Posted November 23, 2016 Share Posted November 23, 2016 How about you post pics of the fucked up board and I'll advise you what I'd do to repair them? 2 Quote Link to comment Share on other sites More sharing options...
JSAbutin Posted November 23, 2016 Share Posted November 23, 2016 Heres the pt01 board And the nanofader board 2 Quote Link to comment Share on other sites More sharing options...
Guest rasteri Posted November 24, 2016 Share Posted November 24, 2016 You wanna be soldering to anywhere on this trace (marked with the red line) : Either scrape the soldermask (green stuff) off the trace itself and solder to that, or solder onto the two intact pads further along the trace. 3 Quote Link to comment Share on other sites More sharing options...
JSAbutin Posted November 24, 2016 Share Posted November 24, 2016 Thanks rasteri! 🙏🏼 1 Quote Link to comment Share on other sites More sharing options...
rithie Posted November 29, 2016 Share Posted November 29, 2016 New Nanofaders batch : white pcb edition ! Only 10 pieces ... Grab yours now ! 3 Quote Link to comment Share on other sites More sharing options...
evil98 Posted November 29, 2016 Share Posted November 29, 2016 New Nanofaders batch : white pcb edition ! Only 10 pieces ... Grab yours now ! where does one grab them from? Quote Link to comment Share on other sites More sharing options...
Rodrigo Posted November 29, 2016 Share Posted November 29, 2016 New Nanofaders batch : white pcb edition ! Only 10 pieces ... Grab yours now ! Indeed, where to grab one from?(and is it possible to buy a populated one, or at least one with all the surface mount components, as to avoid having to chase all those tiny parts down) 1 Quote Link to comment Share on other sites More sharing options...
Guest rasteri Posted November 30, 2016 Share Posted November 30, 2016 http://www.scratchophone.com/?page_id=2283 2 Quote Link to comment Share on other sites More sharing options...
evil98 Posted December 7, 2016 Share Posted December 7, 2016 New Nanofaders batch : white pcb edition ! Only 10 pieces ... Grab yours now ! Indeed, where to grab one from?(and is it possible to buy a populated one, or at least one with all the surface mount components, as to avoid having to chase all those tiny parts down) I have the same question, is it the pcb by itself? or is it completed and functioning? thanks 1 Quote Link to comment Share on other sites More sharing options...
jam1chicago Posted December 14, 2016 Share Posted December 14, 2016 I'm definitely interested in purchasing some fully populated ready to use Nano boards 1 Quote Link to comment Share on other sites More sharing options...
jam1chicago Posted December 23, 2016 Share Posted December 23, 2016 so I caved in and had a few nanofader boards made, currently awaiting on them in the post. Anyone have a list of components needed to solder onto the board to complete it? I'm new at this but very willing and researching and learning, I purchased 10 boards knowing that I'm sure I will screw something up while attaching the components - I'll chop it up to the learning process no problem 3 Quote Link to comment Share on other sites More sharing options...
Guest rasteri Posted December 23, 2016 Share Posted December 23, 2016 I do have a bill of materials somewhere, remind me in a couple days when I'm back at my workshop 1 Quote Link to comment Share on other sites More sharing options...
Mutis Mayfield Posted December 23, 2016 Share Posted December 23, 2016 The one stored at gdrive is still right?https://drive.google.com/open?id=0B4ftWaZ6ARSUWFVaX3Z0MVBJR3c 1 Quote Link to comment Share on other sites More sharing options...
Guest rasteri Posted December 24, 2016 Share Posted December 24, 2016 Naw that's from a much older version, the circuit changed a lot since then. I did find this - https://docs.google.com/spreadsheets/d/1pfgga1LsTm__UrI4FbiULyJIIjrYHxAyfg8nGKcogRA/edit?usp=sharing But it's also from an older version. Some of the components have changed (e.g. the voltage regulator has gone and most of the schmitt trigger section is different) and the farnell part numbers aren't likely to be all that useful outside the UK (although Newark seems to share a lot of the same part numbers). But it's a starting point anyway, just remember to check all the components against the schematic. If you remind me after new year I'll have time to update it then. 2 Quote Link to comment Share on other sites More sharing options...
Guest rasteri Posted December 24, 2016 Share Posted December 24, 2016 Also the more I look at the nanofader the more I wanna do it better. The nano was just a quick hack to help homies get a proper fader into their pt-01s, then the whole portablism thing took off so I just kept making more. Now we have people actually making and selling their own versions for non-pt01 uses, which is cool, but they have loads of problems. E.g. the output amp self-oscillates badly because there's no capacitor in the feedback loop, the virtual ground circuit is a fucking abomination, the TL074 is a terrible choice of opamp for a comparator, the zero crossing detection thing is essentially a hack compared to a proper VCA, etc etc. Doesn't help my email address is on all the boards either, I keep expecting a proper electronic engineer to come across one and call me a twat, haha 4 Quote Link to comment Share on other sites More sharing options...
indigno80 Posted December 24, 2016 Share Posted December 24, 2016 I extracted from Eagle.. https://drive.google.com/file/d/0B6q7bpfQ98dlZ3I0Qk1IMFdsZE0/view?usp=sharing Quote Link to comment Share on other sites More sharing options...
Djmadhatter Posted December 30, 2016 Share Posted December 30, 2016 I cant seem to find the page on the rasteri wiki that shows the pinout details for different faders where the hell is it haha help please Quote Link to comment Share on other sites More sharing options...
indigno80 Posted December 31, 2016 Share Posted December 31, 2016 I cant seem to find the page on the rasteri wiki that shows the pinout details for different faders where the hell is it haha help please http://rasteri.com/wiki/Nanofader_Fader_Guide 2 Quote Link to comment Share on other sites More sharing options...
Djmadhatter Posted December 31, 2016 Share Posted December 31, 2016 I cant seem to find the page on the rasteri wiki that shows the pinout details for different faders where the hell is it haha help please http://rasteri.com/wiki/Nanofader_Fader_Guide Thanks man for the life of me I couldn't find the page 1 Quote Link to comment Share on other sites More sharing options...
mikekimonkey Posted January 4, 2018 Share Posted January 4, 2018 (edited) Hi Rasteri, I bought the nanofader V1.2 at Open Format, I found that there is a tiny litter sound leaking out when I close the fader, tried connect the "W" to the "G" next to it, adjusted the R3 potentiometer but still the same, can't really hear with the PT speaker but very tiny sound with headphone when fader close, is it normal or just me? Thanks~ Edited January 4, 2018 by mikekimonkey Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.