So here is my Pt-01 start/stop button mod thanks to everyone here for giving me the confidence to go ahead I have done a simple 10 step guide I tried to make it as clear as possible for anyone who like me might be a bit scared to try this. I have never done any work on any kind of electronics like this, this is a first for me so I wanted everyone else in my position to see how easy this actually is so here we go Firstly this is my start/stop button This is the button you will find inside your Pt-01 which is activated by the movement of the tone arm Step 1: Remove the original button Step 2: cut the wires connected to the original button Step 3: get the wires out from underneath the rest of the tangle of wires Step 4: decide where your button is going to go I decided to put mine here which worked out perfectly with the length of the original wires saving me from having to add longer wires step 5: drill out your hole for your button (mines a bit messy my largest drill bit was still slightly smaller than the button) Step 6: now add your button Step 7: figure out where to run your wires I did mine like this Step 8: cut some grooves into the plastic casing to fit your wires into (the plastic is very soft and can easily be cut with a blade) Step 9: solder your wires on to your button (be sure to test your connections first) Step 10: run your wires through the grooves you cut and add a small spot of glue or tape or whatever you choose to hold the wires in place I used a hot glue gun And thats it your done
I've also taken a whole bunch of photos of the internals of the Pt-01 for anyone to use as reference pics for mod tutorials or whatever you can find them here: http://s1053.photobucket.com/user/Djmadhatter0z/library/?sort=3&page=1