[Daisy chain decks and mixers?]

This worked perfectly, thanks! I was being pretty thick not actually working out. (Slaps head that hasn't done sooner).

This will be really good for continued both hands scratching practice.

 

 

For the set up that cuts out the other deck (in the 3 dex and 2 mixers scheme) set up a pair of dex and mixer as normal and then plug the out put of that mixer into the line in of one of the channels and then plug another deck into the unused channel of that mixer. That way it will cut out the mixer with the two deck normal set up on one channel of the mixer going into the line in.

 

I cut with a mixer either side of a deck so i can ambi cut on both sides.

 

I think i explained that confusingly.

[Scratching blindfolded]

I'll try this out. My face always looks deformed when i scratch. Along with classic flared nostrils

[Any Scratch DJ's here based in Sydney?]

Hi,

I might be moving out there to live at the end of the year. So was hoping to hook up with scratch heads

[Daisy chain decks and mixers?]

Thanks guys for the input. I'll be trying it out this weekend again.

[Daisy chain decks and mixers?]

Hi, can anyone tell me how to set up 3-4 decks with 2 mixers in a daisy chain fashion?

I've seen this done on some you tube vids and scratch battles but don't know how to did it properly. Does one mixer go into the other mixer? And one deck ends up controlled by both mixers?

 

It's to have 2 scratch djs at the same time

 

Thanks.

[Any Scratch DJ's here based in Sydney?]

Hi,

 

Are there any Scratch DJ's here based in Sydney? I might be moving there soon and want to hook up for scratch Jams.

 

Anyone, anyone? Bueller Bueller?

[Vestax Handy Trax - internal fader mod]

Thanks again. Re doing a circuit board is about 9 times out of my skill zone.

 

It seemed like a good home brew modding scene had grown via portablism.

 

At least the first new product has been developed by numark with scratching in mind. Not sure about the short fader, but maybe it will be good. I'll just get one of those instead of mastering electronics.

[Vestax Handy Trax - internal fader mod]

Thanks guys. I just think I saw somewhere that some guy had put in a mini innofader there.

I'd like to try and do it if there was a little walk though or something. But I'm not an electrical guru

[Vestax Handy Trax - internal fader mod]

Hi, is there anyone out there that has successfully added a decent X fader inside the handy trax? In the same place as the existing fader.

I was hoping to add in an innofader mini.

 

It would be great if someone could share their knowledge. Thanks

[looking to upgrade my camcorder for recording higher res stuff]

I'm fed up trying to use a phone as the memory runs out on my shitty iPhone. Does anyone use a go pro to record scratching? Can you run a line in into it to record the sound from your mixer?

No 4K stuff just good quality as not a phone

 

Thanks

[Boss RC30 with Rane TTM56 Mixer]

Hi I saw an old thread on loopers land hoped you could help me.

 

I have a rane ttm56 and a boss Rc30.

I can't work out the best way to wire it up while using the fx send function.

Rather than only recording the sounds from the decks it's also recording the output of the looper over itself.

Any advice would be good. Also I want to try and add reverb and delay (with some device I will buy) would this have to be chained in somehow?

 

Any help appreciated

Stu

[Advice wantedef or portable audio recorder]

Hi I want to buy a portable audio recorder to record my set so I can sync it up with the video I recorded .Also I'd like to be able to record sounds while out and about, that are good enough quality to use in tunes production.

 

Can anyone advise on one to get, around the £100 or less ish range.

 

Thanks