Jump to content


Photo

Power Adapter for an OG Vestax PMC-06 Pro ?


  • Please log in to reply
2 replies to this topic

#1 loderunner

loderunner
  • Member
  • 1 posts

Posted 28 December 2017 - 04:48 PM

Hi,
 
I just brought out my old Vestax PMC-06 Pro mixer, and I can't find the power adapter anymore.
 
I've been looking over the internet, but I can't seem to find any reliable source as to which adapter to use.
 
It's a 1st generation Pro mixer. Not a Pro A or Pro VCA.
 
The info I found here says I should use a 15V DC adapter, but I keep reading about the 14V AC. Also, if it's a DC adapter, I can't find the polarity.
 
Does anyone know exactly what adapter I need?


#2 Symatic

Symatic
  • Elite Member
  • 5,557 posts

Posted 28 December 2017 - 05:20 PM

i got an 06 pro VCA and had the same thing.... its weird they all use different specs.... mine was the wrost of the bunch if i remember so you should be ok.... the VCA i have uses the weird 14v ac one, so yo ucan probably count that one out cos i remember it was really weird and hard to find..... sorry i cant narrow it down further



#3 cutdisco

cutdisco
  • Member
  • 29 posts

Posted 29 December 2017 - 12:52 PM

pro-05 II will do i can say from my own expierence (or maybe it was just dumb luck)

As far as i know you can exchange no matter what mixer, as long as it's in the range of Pro 05II/06/07

Using a pcv serie adapter will create a hum on your 05/06/07

 

Adapter ring is ,

Outside>positive

Inside>negative




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users