Jump to content

Need help with broken mixer


ELGEE

Recommended Posts

I just bought a faulty dj tech dif 2s from someone on eBay and ot was supposed to have a issue with the crossfader but after having a test the fader works great but Im only getting sound from the left side of the mixer.

 

Is this possibly a blown channel?

Link to comment
Share on other sites

The obvious culprit would be your line switch. I just recently had to replace one that had similar symptoms. If you can't find a replacement switch, you may be able to clean the switch or swap the two switches to at least isolate the problem.

 

Could also be a cold solder joint. If you can find the circuit that deals with that channel, look at the solder joints that are cracked or look cloudy (basically anything that's not shiny silver solder). Sometimes when something heats up the solder expands enough to make contact and the symptom can become flaky.

 

I'm leaning toward your line switch since you say messing with that can get it to kick on.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...