Need help with broken mixer
Posted 07 February 2018 - 07:28 PM
Is this possibly a blown channel?
Posted 07 February 2018 - 09:26 PM
What about the headphones? Does the sound come out OK?
Posted 07 February 2018 - 09:31 PM
Posted 07 February 2018 - 09:58 PM
Im really happy as I only paid £8 for it lol
Posted 08 February 2018 - 08:58 AM
Yes, if a channel is blown, the HPs will only play on one side. Also, if the headshell/needle reads only 1 channel, it will again show on HPs.
Posted 08 February 2018 - 10:59 AM
Posted 08 February 2018 - 12:02 PM
Have you opened it up and looked for anything that looks a bit fucky?
Let's not get too technical here guys.
- DJ Rock Well and Freshcuts like this
Posted 08 February 2018 - 10:32 PM
I havent opened it as yet but is there anything I should look for ?
Posted 09 February 2018 - 11:50 AM
The obvious culprit would be your line switch. I just recently had to replace one that had similar symptoms. If you can't find a replacement switch, you may be able to clean the switch or swap the two switches to at least isolate the problem.
Could also be a cold solder joint. If you can find the circuit that deals with that channel, look at the solder joints that are cracked or look cloudy (basically anything that's not shiny silver solder). Sometimes when something heats up the solder expands enough to make contact and the symptom can become flaky.
I'm leaning toward your line switch since you say messing with that can get it to kick on.
Posted 09 February 2018 - 07:19 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users